Editing the chosen data group
To edit the chosen data group press V/↑ or A/↓ to navigate upwards
or downwards through the menu options. Press the rotary switch
and the selected numerical value will be highlighted with the cursor.
More actuations of the rotary switch will lead to scrolling through
the possible characters. After the desired value is selected, hold
down SET until the number of the data group is shown on the right
side of the screen. The value of the data will now be saved in the
selected data group. By pressing SET again, you return to the menu.
You can leave the menu by pressing SET again.
Status of the selected data group at the start of the device
You can configure the device to automatically activate the output
when the device is turned on. Navigate to do this in the
S-INI
option
and set the value to
ON
to activate the option. Once you have
selected the desired setting, press and hold the SET button until the
data group number is displayed on the right side of the screen.
The data value is now stored. Press the Set button again to return to
the previous menu. To exit the menu, press the Set button again.
Activating and deactivating the ouput
You can press the ON/OFF button to activate or deactivate the output at any
time.
Key lock
The keys can be deactivated to avoid unintentional changes. You can hold
the rotary switch longer than 3 seconds to block the keys or to unlock them
again at any time . The status of the key lock is shown with the lock symbol
on the right side of the screen.