Configuration of the data groups
Data group M0
The M0 data group is a special case. It is the standard data group.
Each time an alternative data group is selected or changes are
made to the existing settings, M0 is immediately overwritten
with the newly selected data. M0 is therefore a real-time duplicate of
the currently selected data group. It is also the data set that is stored
when the power is turned off and recalled the next time the power is
turned on. This is done automatically and transparently without
user input.
Selecting the processing data group
Navigate to the option
M-PRE
to edit a data group. Rotate the rotary
switch to choose the number of the data group which should be
edited. After finishing the settings hold down SET until the number
of the data group is shown on the right side of the screen. By
pressing SET again, you leave the data group settings.
Activation / deactivation
Navigate to the option
M-PRE
and press the rotary switch. After that
rotate the switch to choose the data group by its number which you
want to edit. Press it again to change the status of the option
M-PRE
.
By activating this option, the output stays the same by selecting
a data group. By deactivating this option, the output is
automatically switched off by selecting a data group. Hold down
SET until the number of the data group is shown on the right side of
the screen. The data value will be saved in the data group of the
shown. Press SET again to return to the menu. To leave this menu
press SET.
Data group quick selection
Key combination to choose M1 / M2
Hold down V/↑ or A/↓ for longer than 3 seconds to select the data
group M1 or M2 as a quick selection. The number of the according
data group will be shown on the right side of the screen. The data
groups M1 and M2 are perfect for frequently used settings because
of their quick
selection function.
Selecting an arbitrary data group
Hold down SET for more than 3 seconds to show M0 on the right
side of the screen. Through rotating the rotary switch, it is possible
to choose the requested data group (M0 - M9). To activate the
chosen data group, press SET.