5. USE OF DEVICE
Output voltage and current limit
Press V/↑ to enter the voltage setting mode. Press the Rotary encoder to
move the cursor to the numeric value you want to change. Turning the
knob clockwise increases the value and counterclockwise decreases the
value. Press V/↑ again to exit. Alternatively, after 30 seconds of inactivity,
the setting mode will automatically exit. Press A/↓ to set the output current
limit in the same way.
Configuration of data and conservation values
Press SET in the main screen to enter the data settings menu.
Setting the voltage and current limits
Navigate through the menu to go to the
U-SET
(Voltage) or
I-SET
(Voltage Limit) option. Set the
Output voltage and/or output current limitation according to your
requirements. You can then use the SET button to return to the
menu options. Press the SET button again to exit the menu.
Setting the protection values
Navigate through the menu to go to the limit options Option
S-OVP (overvoltage protection), S-OCP (overcurrent protection) or
S-OPP (overpower protection). Use the knob to set the desired
value. Press the SET button to return to the menu options and press
the SET button again to exit. The output is automatically deactivated
when one of the protection value limits is reached.
Attention!
These are global limit values and should not be
confused with the preset voltages and currents.
Adjusting the screen brightness
Navigate to the option
B-LED
to configurate the screen brightness.
Rotate the rotary switch to adjust the brightness from level 0 to 5.
0
defines the darkest level and 5 the brightest. Press SET to return to
the menu and press it again to leave the menu.