6
HA01 Modes: Preset vs EDIT Modes
The HA01 comes with two primary operating modes: The Preset Mode,
and the EDIT Mode. The Preset mode is the default mode that’s pre-
programmed with the most popular effects and cabinet settings. The EDIT
Mode is used to customize the parameters to your preference. To switch
between the two modes, briefly press (on/off
3
) and (
4
store) buttons at
the same time. The “EDIT” light between these two buttons will illuminate
blue when the EDIT Mode is active.
Preset Mode: (The Default Mode when you turn it on)
•
Illuminated lights to the left of numbers 1-10 at the top indicate the number of the preset you’re using
•
(on/off
3
) and (
4
store) buttons are used to move between the preset
simulation.
•
The lights at the bottom indicate which modules are turned on (illuminated) and which are off (Dark)
•
(Bypass-) and (Tuner+) buttons are used to adjust master volume (- decrease, +
increase) and the numbered lights at the top (1-10) temporarily reflect volume
level.
•
Default factory Presets are based on the chart below:
©Copyright 2021 Journey Instruments Limited
