ENGLISH
02.4
EMERGENCY CONSOLE
In the event radio control fault compromises good operations, the emergency console installed on the appliance can be used to run main
functions such as ignition, shutdown and work output settings.
On, off or alarm reset key.
Next to a green led. When the led is on, it means that
the appliance is running. When the led is blinking, the
appliance is shutting down while the appliance is off
when the led is off.
Command transmission indicator.
The blinking yellow led indicates that the radio
control is communicating with the appliance
control unit.
Remote control cable connection socket
Red alarm signal led.
Output Increase and Decrease keys.
The yellow leds next to the keys indicate the set
output level:
Led On
Output level
1
1
1 and 2
3
2
5
Remote control connection to the console
Radio wave transmission between the radio control and control unit, by nature, could be hindered by disturbances and interferences due
to the vicinity of other electric or electronic devices that emit radio signals in the environment. The opposite may occur at times, meaning
the radio waves transmitted by the Jolly Mec device (at 433 MHz frequency) create interferences with other devices in the vicinity.
To prevent these problems, we recommend wiring the remote control to the emergency console so that radio wave communications are
no longer necessary between the two devices. Remote control wired operations are only possible after removing the batteries from the
specific back compartment as illustrated in
CHAP.02.5 - BATTERY INSTALLATION AND REPLACEMENT
.
7
