13
ENGLISH
CHAP.05 DESCRIPTION
05.1
PRODUCT PRESENTATION
Jolly-Mec products are the result of over forty years experience in the wooden biomass
combustion sector; they are designed and engineered to meet the increasing demands of
today’s markets with high performance levels and savings enveloped in a modern design.
The I-DEA IDRO Heating stove, available in the 9 or 17 kW versions and approved according
to European EN 14785:2006 standards at a third party authority accredited by the European
Commission as a machine inspection and certification institute, is a high performance
electronic controlled closed circuit water heating machine without hot water production,
powered with an ECOLOGIC AND ECONOMIC energy source: wooden pellets.
The I-DEA IDRO Heating stove is a single-body heater with a heat exchanger in special
steel, with a particular flue gas pass and whose special structure allows it to make maximum
use of the heat produced by combustion to achieve high performance that places it at the
top of its category for efficiency and emissions. High yield, over 90%, and reduced polluting
emissions are the characteristics that allow this device to be included in the most advanced
product range on the market, permitting high energy savings and fast returns on initial
investments thanks to the excellent ratio between heating power and costs provided by an
innovative fuel such as pellets.
It works with forced draught, with a combustion fan for pellets and an 80 mm diameter
exhaust pipe located on the rear of the stove. The pellets are fed by an auger driven by a
gear motor that picks the pellets from the hopper and channels them to the firebox via a
chute.
The I-DEA IDRO heating stove can be connected to a radiator or floor heating system. The
heating stove comes with a previously tested standard closed tank hydraulic kit.
Combustion is controlled by means of a radio-frequency electronic control unit with the
following main functions and features:
•
Display
LCD screen that provides an interface with the product
to set function values and read data on work status.
•
Chronothermostat
On and off time setting function programmed with
settable temperature regulation program.
•
Room temperature
Actual room temperature settings and display function
•
Power levels
Control possibilities on 5 heat power levels.
•
Operating status
Function that displays product and connected heat
system operating status in real time.
•
Multilingual
Possibility to select one of five different European
languages (ITA - ENG - DEU - FRA - ESP).
They are also fitted with:
• Pellet container with about 30 kg capacity and minimum level sensor*
• A practical drawer to collect the ashes.
• Heat safety device against any structural or water overheating
• Safety device against possible clogging of the flue pipe
• Fume exhaust fan
• Electrical resistance to ignite combustion and pellets
• Water circulator for the heating system
* Fully empty net container capacity is about 30 kg. The pellet level probe will signal when fuel supplies go into
reserve. When minimum pellet level is signalled operators have about 30 minutes to refuel (the level must be covered by
pellets) before the minimum level alarm is triggered.
WARNING
Frontale
Quadra
Angolo