22
Electrical connections must be carried out by skilled personnel according to the regulations in force (2014/30/UE
and 2014/35/UE).
WARNING
07.4 PREARRANGEMENT FOR ELECTRICAL CONNECTIONS AND AIR INLETS WITH WALL INSTALLA-
TION
The fireplace can work by taking the combustion air from the installation room or directly from the exterior environment. In the first
case, air exchange must be guaranteed in the installation room through an external air intake
5
, in the second case, the air must be
channelled to the fireplace by connecting combustion air intake
6
; in this case, the external air intake
5
will no longer be required.
The position of the combustion air intake ducting hole can be moved on the condition it remains within the cladding. Make sure the
external air intakes are never blocked. It is mandatory to provide the two doors indicated in chap. 07.5 for wood-pellet Foghet versions
to allow for pellet loading and pellet burner maintenance.
The floor have to be strong enought to hold the machine in case it is not fitting
the requirements than take necessary actions (ex. charge distribution plate). The machine has to be installed to be easely cleaned,
smoking pipes and chimney easely reached and cleaned too please install accordingly.
THE DESCRIPTION FOR THE PREPARATION OF THE AIR INTAKES IS VALID FOR THE FIREPLACE VERSION AND FOR THE
STOVE VERSION.
The A, E heights are to be taken/calculated according to the position of the fireplace and the type of cladding.
NOTE
1. Ambient temperature or ambient thermostat probe
2. Power supply 230 V 50 Hz
3. Omnipolar switch
4. Centre line
5. Outside air inlet 200x200 mm
6. Combustion air intake ducting
All measurements are in mm.
1
2
3
4
5
6
100
112
381
