background image

12

 CHAP.05    DESCRIPTION

 

05.1 

PRODUCT PRESENTATION

Jolly-Mec products are the result of over forty years experience in the wooden biomass

combustion sector; they are designed and engineered to meet the increasing demands of

today’s markets with high performance levels and savings enveloped in a modern design.

“FOGHET EVO is an air heater homologated and tested according to European 

standards EN 13229, EN 14785 and EN 13240 operating with wood or wood and pellets 

(ALTERNATIVE AND RENEWABLE ENERGY).

Foghet Evo is a monobloc consisting of a double-wall heat exchanger in special steel whose 

particular construction allows maximum exploitation of the combustion heat, obtaining 

high efficiencies of up to 90%, making it one of the best in the category for efficiency and 

emissions.

The Foghet Evo has an electronic controller that manages the fireplace when operating on 

wood or pellets.

 

When running on pellets, it has a chronothermostat for automatic start up 

and switch off with room temperature. With the electronic control unit, if it is programmed, 

in the event that the wood goes out and the room needs more heat, the heating mode 

automatically switches from wood to pellet mode with automatic pellet ignition, maintaining 

the desired temperature. The control unit triggers an acoustic and visual warning signal 

when the pellet runs out and from which it is also possible to manage a supplementary pellet 

container.

  With the controller it is also possible to run a check-up on the various components even with the fireplace out.

When running on wood, it can also operate with intermittent combustion; it can be used as a fireplace or normal stove, but offers a 

series of advantages of controlled combustion based on the temperature.

Wood-burning Foghet Evo, with the specific pellet burner JOLLY MEC fitted, becomes a 

”continuous fire” heating machine, exactly like a boiler. The pellet hopper has a capacity of 

approximately 41 kg, however, to obtain a longer burn time it can be coupled to a second 

and larger hopper, even located in another room.

The operating mode can be quickly switched from wood to pellet mode and vice-versa: 

simply move the grid fitted above the burner fireplace and select pellet mode.

In pellet mode, heating power is managed by means of the electronic controller provided.

It is fitted with a double ceramic glass door to reduce the high temperatures generated by 

combustion.

A stove version of Foghet Evo is also available with RFE cladding.

Foghet EVO Aria

RFE Aria

Содержание Foghet EVO Aria L 12 kW













































Отзывы: