3.4.2 Move ink cartridge stabilizer outward (Prepare for ink cartridge installation)
Please use
APP to move ink cartridge stabilizer
1. Use APP -> Click‘Information’->‘Check the printer’->‘Printer maintenance’->‘Replace the inkjet cartridge’
2. On this page, click on the“Move ink cartridge”and the stabilizer will move toward front cover. Please wait stabilizer is
fully stopped before open front cover.
Figure 3.4.2 Mobile stabilizer
3.4.3 Replace ink cartridge or Install new ink cartridge
Important:
Do not touch the yellow contacts on the ink cartridge and the surface of the chip at the bottom of ink cartridge.
1. Open the front cover.
2. Lift the blue lever upward on the ink cartridge stabilizer.
3. Remove ink cartridge: When the blue lever is lift upward, the cartridge will flip and please raised cartridge at a
45 degree angle to the outward and finally disengaged with stabilizer.
4. Install new ink cartridge: Insert the new ink cartridge at 45 degree angle into the ink cartridge stabilizer, and
press blue lever downward to engage
ink cartridge on stabilizer.
5. Close the front cover.
Figure 3.4.3 Replace/Install ink cartridge
· 07 ·
①
Open front cover
②
Lift blue lever
③
Unplug ink cartridge
④
Insert new ink cartridge
⑤
Press blue lever downward
⑥
Close the front cover
