FOREWORD
This manual mainly guides the basic operating procedures and precautions the users when using the product to
avoid problems such
as product circuit abnormality, electric shock, wire fire, operator injury and damage caused
by improper use of the product.
Table 1-1 Explain the definitions of the two Symbols in this manual
1.1 Warnings
1. Please read this instruction manual carefully.
2. Never put the ink cartridge or power adapter into water or any liquid.
3. The metal contacts on ink cartridge must be kept dry and avoid contact with the wafer surface.
4. Do not touch the power cord or power outlet directly with a wet hand.
5. This product must be placed away from extreme cold and heat sources and from direct sunlight.
6. The product will rapidly move the ink cartridge during print process; user cannot physical contact print area
to prevent injuries during printing.
7. When the power adapter
、
power cord
or power socket is damaged , please do not use this product and
please contact customer service
for repair.
8. Please clean the drip tray every day. If you do not clean the drip tray, it will breed bacteria and damage the product.
This behavior is not allowed and it is out the scope of product warranty.
9. Please avoid the user’s jewelry and hair contact with this product to avoid personal injury.
10. If any emergency occurs, turn off the power and unplug the power cord.
11. Please do not open the back cover of this product. This operation is very dangerous and will affect the
warranty
of this product.
12. During the use of the product, please be careful to avoid the hand being pinched, pressed, or bumped; if the
above problem occurs, please turn
off the power immediately.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
1.2
Precautions
1. The print media mainly on milk foam
、
cream
foam
、
biscuits
、
frosting biscuits and similar foods.
2. When preparing foods list above, please make sure the surface is smooth and flat; If the surface irregularities
on the print media, ink cartridge might be damaged and printing will be failed.
3. When the ink is stained with milk foam, cream, foam, biscuits, icing, etc. , please clean the ink cartridge immediately;
if it is not cleaned in time and the ink cartridge is damaged , it must be replaced with new ink before use.
4. Prohibit the use of ink cartridge from other companies; any problems arising from the use of other company's
ink cartridge, we shall not be responsible for, and product warranty will be invalid immediately.
5. This product uses an optical sensor to detect the Mug, Please do not use a transparent glass or a transparent
platform when printing.
6. Please follow the instruction manual to operate the product. Improper use of the product will and damaged
the product is not covered by product warranty.
· 01 ·
Symbol
Description
Warning:
When this indicator appears in the manual , it indicates that the behavior or status may
cause abnormalities
in the circuit of the product, electric shock, fire of the wires, injury to the
operator,
or damage to the product.
Caution:
When this symbol appears on the manual , it indicates that the behavior or condition
may damage the product
or cause injury to the operator.
