background image

Surface Technology

Oberflächentechnik

Surface Technology

Oberflächentechnik

5

Warranty

joke Technology GmbH warrant the correct manufacture of every joke product which is delivered 

in accordance with the terms of contract and supply.  

This warranty does not cover damages caused by normal wear and tear, incorrect handling, 

negligent use, the fitting of non-original spare parts, inadequate care and/or a failure to comply 

with this technical manual. .

The device may only be used by appropriately trained and commissioned personnel. If it is not, 

all warranty claims will be forfeited according to the terms of delivery.

Device identification

The serial number is to be found on the grip sleeve.  

Waste disposal

 

Ensure that the device is properly disposed of and is on no account committed 

to the domestic waste. 

 

4

Owing to its active vibration damping, the filing handpiece is an innovative device. Minute natural 

vibrations provide excellent properties for precision work that rule out fatigue even during pro-

longed working processes. If the following simple instructions for use of the device are followed, 

we guarantee a long service life under optimum working conditions.

Warranty claims shall be void if the filing handpiece is opened.

Содержание 0 750 700













Отзывы: