Johnson J2R4SUC 2007, Руководство по обслуживанию

Страница: 40 / 179

38
MAINTENANCE
INSPECTION AND MAINTENANCE SCHEDULE
INSPECTION AND MAINTENANCE SCHEDULE
Routine inspection and maintenance is necessary for all mechanized products. Periodic maintenance
contributes to the product’s life span. The following chart provides guidelines for outboard inspection and
maintenance to be performed by an authorized Dealer.
IMPORTANT:
Outboards used for rental operations, commercial applications, or other high hour use
applications require more frequent inspections and maintenance. Inspection and maintenance should be
adjusted according to operating conditions and use; and environmental conditions.
.
Engine Maintenance and Inspection Schedule
Description
Engine
Care
Product
Frequency
Each Use 10-Hour Inspection Every 5
0
Hours
o
r 6 m
ont
hs
Every 1
00 Hours
or
An
nu
ally
Every 2
00 Hours
or
Bian
nu
ally
Swivel bracket, inspect and lubricate
(1)
D
Every 60 days / Every 30 in Saltwater
Clamp screws, inspect and lubricate
(1)
D
Every 60 days / Every 30 in Saltwater
Throttle linkage, inspect and lubricate
(1)
D
Every 60 days / Every 30 in Saltwater
Steering bracket, lubricate
(1)
D
Every 60 days / Every 30 in Saltwater
Shift lever, lubricate
(1)
D
Every 60 days / Every 30 in Saltwater
Lubrication and corrosion protection for metallic components
A
Every 60 days / Every 30 in Saltwater
Anticorrosion anodes, check operation
3 3
Water intake screens, check condition
3 3
Overboard water pump indicator, check operation
3 3
Steering friction, check/adjust
3 3
Throttle and shift operation, check function
3 3
Emergency stop circuit and lanyard, check function
3 3
Clamp screws, tighten
3 3
Starter, inspect cord
3 3
Crankcase oil level, check H
3 3
Flush cooling system
3
Operator’s Guide, onboard
3
Fuel system components, inspect and repair leaks
(3)
3 3
Fastener inspection, tighten loosened components
3 3
Thermostat, inspect and check operation
3 3
Fuel filter inspection, eliminate contamination
3 3
Electrical and ignition wires and connections, inspect
3
3
Gearcase lubricant, replace B
3 3
Powerhead synchronization and linkage, inspect
(3)
D
3 3