14
or slightly damp cloth.
5. Place the filter insert (A) back into the
filter mount (B) and then place the filter
mount back into the dust container (C).
Place the dust container into the device.
Cleaning the Floor Brush
• Turn the device upside down and remove
any hair and dirt which has become caught
in the floor brush.
• To make it easier to clean, you can also
remove the brush cover:
1. Unscrew the 4 screws on the brush
cover (see Fig. 1)
using a suitable screwdriver and remove
the cover.
2. Remove the floor brush from the device.
3. You can now clean the brush and the
cover. If you rinse the two parts with water,
allow all components to dry completely
before you put them back together.
4. Before you reinsert the floor brush and
the cover, clean out the brush compar-
tment in the device with a brush.
5. Place the floor brush into the device
again. Please note that the side with the
toothed wheel must be hooked into the fan
belt.
6. Close the brush cover and tighten the 4
screws again.
Cleaning the Housing
• Do not use corrosive or abrasive cleaning
agents or cleaning pads to clean the de-
vice.
These could damage the surface. If neces-
sary, just wipe down the device with a
damp cloth.
Technical Data
Model: PC-R001
Device: "Clean Maxx
®
" Premium 2 in 1
Robot Vacuum Cleaner
Output: 35 W
Diameter: 36.2 cm
Height: 14.8 cm
Battery: 11,1 V; 1800 mAH
Battery charge duration: approx. 6 hours
Operating duration: approx. 50 minutes
Dust container capacity: approx. 500 ml
Noise emission: approx. 70 db
Adapter
Model: LK-D240040
Voltage supply: 230 V AC, 50 Hz
Output voltage: 14,4 V DC, 300 mA
Protection class: II
All manuals and user guides at all-guides.com
