background image

6

 - General Information

4. WHAT TO DO TO OBTAIN WARRANTY COVERAGE

The registered owner must notify an authorized Dealer within two (2) days of the appearance of a defect.
Owner must bring Product, including any defective part therein, to Dealer promptly after the appearance
of the defect, and in any event, within the warranty period, and must provide Dealer with reasonable op-
portunity to repair the defect. The expenses of transporting Product to and from Dealer for warranty ser-
vice are to be borne by the owner.

If the Product has not previously been registered, the owner may also be required to present proof of pur-
chase to Dealer for warranty repairs. Owner is required to sign the repair/work order prior to the start of
the repair in order to validate the warranty repair.

All parts replaced under this warranty become the property of BRP US Inc.

5. WHAT BRP US INC. WILL DO

BRP US Inc.'s obligations under this warranty are limited to, at its sole discretion, repairing or replacing
parts of Product found to be defective in material or workmanship, in the reasonable judgment of BRP US
Inc. Such repair or replacement of parts will be done without charge for parts and labor, at any authorized
Dealer. BRP US Inc.'s responsibility is limited to making the required repairs or replacements of parts with
new or BRP US Inc.-certified re-manufactured parts. No claim of breach of warranty shall be cause for
cancellation or rescission of the sale of Product to owner.

In the event that warranty service is required outside of the fifty United States or Canada, owner will bear
responsibility for any additional charges due to local practices and conditions, such as, but not limited to,
freight, insurance, taxes, license fees, import duties, and any and all other financial charges, including
those levied by governments, states, territories and their respective agencies.

BRP US Inc. reserves the right to improve, modify or change Products from time to time without assuming
any obligation to modify Products previously manufactured.

6. EXCLUSIONS - The following are not warranted under any circumstances:

• Replacement of parts due to normal wear and tear;
• Routine maintenance parts and services including but not limited to: maintenance requirements, engine

and lower unit oil changes, lubrication, valve and linkage adjustments and replacement of fuses, zinc
anodes, thermostats, timing belts, starter motor bushings, trim motor brushes, filters, propellers, propel-
ler bushings and spark plugs;

• Damage caused by improper or lack of installation, maintenance, winterization and/or storage, failure

to follow the procedures and recommendations in the Operator's Guide;

• Damage resulting from removal of parts, improper repairs, service, maintenance, or modification, or use

of parts or accessories not manufactured or approved by BRP US Inc., which in its reasonable judg-
ment, are either incompatible with Product or adversely affect its operation, performance, or durability,
or resulting from repairs done by a person that is not an authorized Dealer;

• Damage caused by abuse, misuse, abnormal use, neglect, racing, improper operation or operation of

the Product in a manner inconsistent with the recommended operation described in the Operator's
Guide;

• Damage resulting from external damage, accident, submersion, water ingestion, fire, theft, vandalism

or any act of God;

• Operation without proper fuel, oil or lubrication or with fuels, oils or lubricants which are not suitable for

use with the Product (see the Operator's Guide);

• Damage resulting from rust or corrosion;
• Damage caused from cooling system blockage by foreign material;
• Damage resulting from sand or debris in the water pump;
• Cosmetic or paint changes due to exposure to the elements.

This warranty 

will be voided in its entirety and rendered null and void

 where:

• Product has been altered or modified in such a way so as to adversely affect its operation, performance

or durability, or change its intended use, horsepower or emission levels; or

• Product is or has been used for racing at any point, even by a prior owner.

Содержание 4 HORSEPOWER





















































Отзывы: