Johnson 4 HORSEPOWER, Руководство оператора

Страница: 25 / 52

Engine Starting -
23
Move the shift lever to NEUTRAL.
1. NEUTRAL
Remove the engine cover.
Remove the bolts securing the recoil starter in
place.
Loosen the lock nut, take off the NSI cable from the
bracket, and separate the end of the cable from the
cam.
1. Lock nut
2. Cam
Lift off the recoil starter assembly.
Tie a knot in one end of the emergency starter cord.
Tie the other end around the screwdriver handle in
the tool kit.
Connect clip to the emergency stop switch / STOP
button.
Place knot of starter cord in notch on flywheel pul-
ley. Wrap cord around pulley clockwise.
Follow the starting procedure in Engine Starting .
While seated, pull hard on emergency starting cord
quickly and completely. Repeat, if necessary.
1. NEUTRAL
After starting, run the engine in NEUTRAL with the
throttle at the START position for two minutes.
Then reduce speed to an idle.
DO NOT attempt to replace manual starter or en-
gine cover while engine is running. If equipped, at-
tach emergency stop switch’s lanyard to a secure
place on your clothing.
Proceed to nearest harbor for service.
1
1
2
1