Johnson Controls YVAHP072B31S, Руководство по обслуживанию

Страница: 1266 / 1796

Information Pop-up
When the status of the external input and output changes, an information pop-up will be displayed.
Control Content Display Area
Show the content for the external
control in process. If external control
is cancelled, the relevant parts will
disappear from the content.
Check Box to Stop Update
Stop updating the information of
this pop-up temporary.
Close Button
Close this pop-up.
NOTICE:
Ɣ The pop-up message can be hidden by setting [Settings] > [Other1] > [Info. pop-up] > [No display].
Ɣ When closing the pop-up upon checking the box [Update stop], the pop-up will display when the status of
the external input and output is updated.
NOTES:
Ɣ If turning OFF the adapter while the level signal is set in the external input, set the level signal after turning
ON the adapter again until the pop-up for the connection con ¿ rmation disappears.
In case that the adapter is turned ON without the level signal input, set the level signal again and then
cancel setting for the level signal.
Ɣ Reassume control from the system when:
1. When the external input status changed while the adapter or AC is turned OFF.
2. When the power to the adapter or AC is turned from OFF to ON while the external input is set.
3. When the external input status changed while a communication error between the adapter and the AC
(Alarm 60, 61, 64, and 65) had occurred.
4. When a communication error between the adapter and the AC (Alarm 60, 61, 64, and 65) occurred
while the external input is set, then it recovered.
Ɣ When performing an emergency stop for the unit where the function selection for the indoor unit control is
set, check the setting after canceling emergency stop.
2-346
Service Manual
OPERATION