iotega Wireless Security and Automation System
Safety Instructions for Skilled Persons
Follow all warnings and Instructions specified within this doc-
ument and/or on the equipment.
IMPORTANT! Save these instructions for future reference. Inform
the end-user of the safety precautions that must be observed
when operating this equipment.
Before Installing
Ensure your package includes the following items:
- Installation and User manuals
- iotega alarm controller with mounting plate
- Ethernet cable
- Mounting hardware
SAFETY Precautions Required During Installation
Do not touch the equipment and its connected cables during an
electrical storm; there may be a risk of electric shock.
Never touch uninsulated wires or terminals unless the equip-
ment has been disconnected from the mains .
Position cables so that accidents cannot occur. Connected
cables must not be subject to excessive mechanical strain.
Use authorized accessories only with this equipment
Do not place any object on the top of this equipment, it is not
designed to support any supplementary weight
Do not spill any liquids on this equipment.
Do not attempt to service this product yourself. Opening or
removing the cover may expose you to dangerous voltage or
other risk. Refer servicing to skilled persons
Selecting A Suitable Location For The Alarm Controller
Use the following list as a guide to find a suitable location to
install this equipment:
Locate near a power outlet.
Select a location free from vibration and shock.
Place alarm controller on a flat, stable surface and follow the
installation instructions.
Do not locate this product where people may walk on the sec-
ondary circuit cable(s).
Do not connect alarm controller to electrical the same circuit as
large appliances.
Do not select a location that exposes your alarm controller to dir-
ect sunlight, excessive heat, moisture, vapors, chemicals or dust.
Do not install this equipment near water. (e.g., bath tub, kit-
chen/laundry sink, wet basement, near a swimming pool).
Do not install this equipment and accessories in areas where
risk of explosion exists.
Do not connect this equipment to electrical outlets controlled by
wall switches or automatic timers.
Avoid interference sources.
Avoid installing equipment near heaters, air conditioners, vent-
ilators, and refrigerators.
Avoid locating equipment close to or on top of large metal
objects (e.g., wall studs). See "Locating Detectors and Escape
Plan" on page 48 for information on locating smoke and CO
detectors.
Data Collection Statement
The Tyco cloud collects Data from the iotega panel (public IP
address, security events and statuses, security configuration,
and system diagnostics) in order to improve system
performance, troubleshoot customer issues, and improve user
experience. You have the right to access, correct and request
removal of your personal data by contacting info@tyco-
securityproducts.com and the right to lodge a complaint with a
supervisory authority. Tyco will not transfer this data to other
parties, except for our cloud service provider in the US, with
whom we have contractual Personal Data Processing Terms
and EU Standard Contractual Clauses. Tyco uses industry-stand-
ard safeguards to protect your personal information. Find out
more in our Privacy Statement at www.tyco.com/privacy. Your
personal information will be retained as long as necessary to
achieve the purpose for which it was collected and for any
period thereafter as legally required or permitted by applicable
law.
- 1 -
