Johnson Controls KN-ZW-WH1-B04, Руководство по эксплуатации Manualline

Страница: 8 / 19

Operation Guideline
Product Model: KONOzw
Copyright  Johnson Controls Inc 2019 All Rights Reserved
Page 8 of 19
• If the exclusion process is not successful, then HOME screen will display ER:02 to indicate the error.
Press and hold the knob for over 5 seconds to return to the inclusion/exclusion menu and retry the
exclusion.
6.3 Error code and description
6.4 Z-Wave Command Classes
KONOzw supports the following command classes:
Association Group:
Version V2
Group ID 1
Maximum Nodes 5
Description Z-Wave Plus Lifeline
Association NodeID 001
KONOzw is associated with the Zwave controller/hub in the network.
The following events will trigger a notification(report) from KONOzw to controller.
Event Report
Device Reset Locally Device Reset Locally Notification
Thermostat Mode Change
Thermostat Mode Report
Thermostat Setpoint Change Thermostat Setpoint Report
Fan Mode Change
Thermostat Fan Mode Report
Thermostat Operating State Change Thermostat Operating State Report
Battery Level Change Battery Report
Temperature Change
Multilevel Sensor Report
AC power connected or
disconnected
Notification Report - Power Management
Error Code Description
Er:00 System Error – Host Boot up fail
Er:01 System Error – No valve (O or B) connected in Heat Pump system
Er:02 Provisioning error – No network
Er:09 Radio Error – No response from module
Er:0A Radio Error – Poor signal (<-76dBm RSSI)
Er:0B Radio Error – Network not found