Operation Guideline
Product Model: KONOzw
Copyright
Johnson Controls Inc 2019
All Rights Reserved
Page 6 of 19
Step 2: At the hub portal, click “Add device”.
Noted:
If the hub is supporting S2 (authenticated) security mode, it will ask the user to provide the
DSK code of the device to complete the inclusion process. The DSK code is printed on the product
label as shown below:
Input the first 5 digits in the hub portal and follow the instructions provided by the hub.
Remove the décor snap cover from the device and the product label is attached on the device front
housing. There is also the same product label attached on the product gift-box.
If S0 or S2 (unauthenticated) is used, no DSK is needed then.
Step 3: Device is added to the hub successfully.
•
The device will automatically return to the HOME screen after 5 seconds, or you can press the knob to
return to the HOME screen.
•
If the inclusion process is not successful, then the HOME screen will display ER:02 to indicate the error.
Press and hold the knob for over 5 seconds to return to the
inclusion/exclusion
menu and retry the
inclusion.
