Changing Display Settings
The FMS-1655R display screen may be
customized using the options on the
Display
Setup
menu. The settings for the Safety
Halo™ feature may be enabled or disabled at
the
Safety Halo™
option on the
Display Setup
menu. Settings include normal intensity, auto-
dim intensity, and duration.
The auto-dim feature of the Safety Halo
™
function allows the FMS-1655R to go to
a reduced intensity level (or even turn off
completely) between specified hours each
day. The display brightness may be adjusted
by selecting Display Setup >> Set Brightness.
The specified brightness setting is stored in
non-volatile memory and remains in effect
through a power cycle.
The time and date, which are only displayed
while
Standard View
mode is selected, may
be adjusted either by using the hotspots on
the main display, or by selecting Display
Setup >> Set Time & Date. The FMS-1655R
is also designed to request time and date
settings periodically from the companion
FMS-1655, assuming it resides on a network
that has a time server available. This ensures
that the time and date are accurate on the
FMS-1655R main display.
Due to continuous improvement, JCI reserves the right to change product specifications without notice.
INSTALLATION MANUAL
-
6
-
Fig 13 . Adding a Password
Configuring Display Module Settings
Options Dipswitch (S1) –
internal use only
1. Amulet Chip Mode Selection:
OFF = Programming Mode
ON = Run Mode
2. Touchscreen Calibration Mode:
OFF = Force calibration
ON = Auto calibration
3.
Reserved
4.
Reserved
Options Dipswitch (S2) –
internal use only
1. Mode Select:
OFF = FMS/HMS1655R
ON = Reserved
2. Test Mode:
OFF = Inactive
ON = Active
3. FMS/HMS Mode:
OFF = FMS1655R
ON = HMS1655R
4: Operational Mode
OFF = Demo Mode
ON = Run Mode
Pushbutton Switch (SW1)
Reset Button
Pushbutton Switch (SW2)
Reserved
