Johnson Controls CIC1006B21S, Инструкция по эксплуатации

Страница: 36 / 50

OPTIONAL PARTS
3-8
TC-18002
3.7.4 Accessories / Options
No. Accessory Q’ty Remarks
1
IR Receiver Kit
C1IRK01
EMERGENCY
TIMER FILTER DEF RUN
HEAT COOL
1 With Connecting Cable
2
Clamp 1 For Fixing Cable
3
Tie-Wrap 3 For Fixing Cable
4
Installation Manual 1 -
5
Operation Manual 1 -
3.7.5 Installation
● Turn OFF the power source completely before setting the DIP switch, installation work and electrical
wiring work for IR receiver kit.
If not, it may cause an electric shock.
● Perform securely the installation work referring to this installation manual.
If the installation is not completed, it may cause injury by falling down the IR receiver kit.
● Do not install the IR receiver kit where the flammable gases may generate or enter.
It may cause heat generation or a fire.
● Perform securely the electrical wiring work.
If the electrical work is not completed, heat generation at the connection, a fire or an electric shock may
occur.
● Make sure that the electrical wires are securely fixed in order not to apply an external force to the
terminal connections of the wirings. Not doing so may cause heat generation or a fire.
● When the IR receiver kit is near ambient lighting, it may not receive a signal from the wireless controller.
Therefore, pay particular attention to the installation position of the IR receiver kit.
● Do not run the connecting cable for the IR receiver kit and the power source cable (208/230V) in
parallel. It may cause a malfunction of the IR receiver kit.
● When the IR receiver kit is installed with the indoor units’ installation, start from procedure
3
.
● When the IR receiver kit is installed after the indoor units’ installation, be sure to turn OFF the power
source completely before starting installation.