8
A419ABG-3 Electronic Temperature Control Installation Instructions
Repairs and Replacement
Do not attempt to repair or recalibrate the
A419 temperature control. In case of a defective or
improperly functioning control, contact your nearest
Authorized Johnson Controls/PENN distributor or
sales representative.
When contacting your Johnson Controls/PENN
distributor, have the model number of the control
available. This number can be found on the label
inside the cover of the control.
Ordering Information
Refer to Table 6 to order sensors, mounting hardware
and other accessories used to install A419 controls.
Contact your nearest Johnson Controls/PENN
distributor or sales representative to order these
products.
Table 6: A419 Controls Accessories
Product Code Number
Description
A99BB-200
Temperature Sensor
: PTC Sensor with 6-1/2 ft (2 m) Non-shielded 2-Wire Lead
BKT287-1R
DIN Rail
: 12 in. (305 mm) long
BKT287-2R
DIN Rail
: 36 in. (914 mm) long
PLT344-1R
End Clamps for DIN Rail Mounting
CLK350-2C
7-Day Programmable Digital Clock
for activating Binary Offset
WEL11A-601C
Immersion Well
for Mounting Sensor in Liquid Applications
Technical Specifications
Product
A419ABG-3C Electronic Temperature Control
Setpoint Range
-30 to 212
°
F (-34 to 100
°
C)
Differential Range
1 to 30F
°
(1 to 30C
°
)
Supply Voltage
120 VAC, 60 Hz
Power Consumption
1.8 VA Maximum
SPST Output Relay
Contacts Electrical
Ratings
Full Load Amperes N.O.:
12 A
Locked Rotor Amperes N.O. :
72 A
Non-inductive Amperes N.O.:
10 A
Pilot Duty:
125 VA @ 120 VAC
Sensor Type
PTC Sensor with 6.6 ft (2.0 m) leads
Control Ambient
Temperature
Operating:
-30 to 140
°
F (-34 to 60
°
C)
Shipping:
-40 to 185
°
F (-40 to 85
°
C)
Ambient Humidity
0 to 95% RH Noncondensing; Maximum Dew Point: 85
°
F (29
°
C)
Control Enclosure Material
Case and Cover:
NEMA 1 - High-Impact Thermoplastic
Agency Listings
UL: File E27734; CCN’s XAPX (US), XAPX7 (Canada)
FCC: CFR 47, Part 15, Class A. DOC, Class A
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, contact Application Engineering at 1-800-275-5676. Johnson Controls, Inc. shall not be liable for damages resulting from
misapplication or misuse of its products.
Controls Group
507 E. Michigan Street
P.O. Box 423
Published in U.S.A.
Milwaukee, WI 53201
www.johnsoncontrols.com
