Joerns Healthcare Oxford Hoyer Professional Elevate, Руководство по обслуживанию

Страница: 4 / 24

4
294000.10040 Rev A
INSPECTION CRITERIA
KNEE PAD
Check for secure attachment of the kneepad assy to the mounting bracket on the mast.
Check the kneepad is easily adjustable using the height-adjusting lever.
Check the kneepad assembly can’t slide up or down when the height adjusting lever is released.
Check the leg restraining straps for damage and wear i.e. fraying, loose stitching etc. Ensure the buckles lock and release correctly.
Check the condition of the kneepad for splits and or rips.
FOOT PLATE
Check for firm and secure fitment of the footplate to the footplate base.
Check the foot tray for cracks or damage.
LEG PIVOTS
Check the leg pivots are secure and the legs pivot freely. Any stiffness must be investigated.
Make sure there is no excessive play in the leg pivots.
CASTORS
Check all castors for firm attachment to the legs.
Check for free rotation of the castor and the wheels.
Remove any build up of threads, hair or fluff.
Lubricate if necessary with a light mineral based grease.
Check correct operation of the brakes.
LIFT ACTUATOR
The actuator should require no maintenance.
Check for correct operation.
Check for correct operation of mechanical emergency lowering device, this should be done by applying the full SWL to the
support arms, raise the weight a short distance and carefully pull up the emergency lever, the weights should lower to the ground
in a safe and controlled descent. This test should always be carried out with the full SWL.
Confirm anti-crush precautions are operational.
Listen for any unusual noise.
Check for wear on the mounting boss top and bottom.
(Any excessive movement or play of the actuator must be investigated) .
BATTERIES
The batteries in the power pack should not require maintenance, other than regular charging as detailed in the charging instructions.
CHARGING UNIT
Confirm the charger unit is charging the battery pack.
Check mains plug is fitted with the properly rated fuse.
Check the safety of the input and output lead wiring.
LOAD CELL AND WEIGHT DISPLAY (Optional)
Turn on the display and confirm the weight display indicates a reading of 0 (kg/lb) with no load on either the foot tray or support arms.
If calibration is required see calibration procedure on Page 5.
CLEANING
Clean with ordinary soap and water and/or any hard surface disinfectant. Harsh chemical cleaners or abrasives should be
avoided as these may damage the surface finish of the lift. Avoid wetting any of the electrical parts.