jobmate JMCMS18G, Инструкция по безопасности и эксплуатации

Страница: 6 / 16

6
acceptable. Bright shiny reflective sheet steel
or similar is not suitable for laser applications
as the reflective surface may direct the laser
beam back at the operator.
5. Do not change the laser device with a different
type. The manufacturer or an authorized
agent must carry out repairs.
6. CAUTION: Use of controls or adjustments
other than those specified herein may result
in hazardous radiation exposure.
ADDITIONAL SAFETY
WARNING FOR CLASS 2
LASER
The laser device fitted to this tool is CLASS 2
with a maximum radiation of 1mW and 650nm
wavelength.
CLASS 2 LASER RADIATION, DO NOT STARE
INTO BEAM
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Indoor use only
RCM marking
Do not expose to rain or water
Do not burn
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point.
Fuse
Positive terminal
Negative terminal
Laser radiation
Do not stare into beam
ABN: Australian Business Number. By this number,
business information such as entity type, status, business
location etc. can be found at website http://abr.business.
gov.au.
ABN of Positec Australia Pty Limited is 14 101 682 357