jobmate 54-2891-8, Руководство пользователя

Страница: 3 / 22

3
DRILL
Chuck speeds …………….. 0–650 RPM (no load)
Battery ……………………... 18 V
Clutch positions …………... 17 including drill mode
Keyless chuck ……………..
3
/
8
”
Weight ……………………... 7 lb. 14 oz. (3.6 kg)
BATTERY & CHARGER
Battery Voltage …………… 18 V
Charger ……………………. 3–5 Hour, Class 2
Charger Input ……………... 120 V AC, 60 Hz
Charger Output …………… 25 V DC, 500 mA
Replacement Battery …….. 54-2801-4
WARNING:
To avoid electrical hazards, fire hazards or damage to the battery
charger, use proper circuit protection.
The battery charger is wired at the factory for 110
–120 V operation. It must be
connected to a 110
–120 V, 15 A time delayed fuse or circuit breaker. To avoid shock
or fire, replace power cord immediately if it is worn, cut or damaged in any way.
SPECIFICATIONS
!
!
ALWAYS WEAR EYE PROTECTION
Any power tool can throw foreign objects into your eyes which could cause
permanent eye damage. ALWAYS wear safety goggles (not glasses) that
comply with ANSI safety standard Z87.1. Everyday glasses have only
impact resistant lenses. They ARE NOT safety glasses.
WARNING:
Glasses or goggles not in compliance with ANSI Z87.1 could
cause serious injury when they break.
POWER TOOL SAFETY