Jntech JNP Series, Руководство пользователя

Страница: 67 / 89

67
inverter only use solar energy.(This parameter setting is
recommended to be about 75% of the load pump power,
with the minimum power change of 100W.)
ESC
Return to the previous menu.
8.3.2.3 Pump Information Setting
Used to set relevant parameters of water pump information.
Table 8-11 Description of water pump information setting (user sets according
to water pump parameters)
Note
！
● When the user selects solar pump inverter, the parameters in the menu of "DSP
Parameter Setting" have been set by factory, and these parame ters cannot be
changed easily.
● When the output selection is changed, the inverter must be powered off. It can
only be started up again after the inverter is completely powered off. Otherwise,
the inverter and water pump may be damaged.
Pump Information
Setting
Description Note
H_rate
Set pump rated lift head (m)
According to
pump nameplate
input Settings
Q_rate
Set pump rated water flow (m3/h)