JNJ SPAS SPA-8098, Руководство по эксплуатации

Страница: 7 / 15

7
time
2)
、
It will add 1 hour when pressing
“
HOUR
”
each time and hours could be added continually when pressing
the
“
HOUR
”
without stopping. The adjustment of hours is 0-23
It will add 1 minute when pressing
“
MIN
”
each time and minutes could be added continually when
pressing the
“
MIN
”
without stopping. The adjustment range is 0~59
After time setting of pre-heating, proceed to the next step.
2
） 、
Press
“
SET
VOL+
”
to set the continual for pre-heating. It will show the minimum continue time is 10 minutes.
And this time will not flash on LCD screen. It will add 10 minutes by pressing
“
MIN
”
each time and
it will add 1 hour when pressing
“
HOUR
”
each time. Please note that the maximum continual time is 19
hours and 50 minutes. When you have correctly set the pre-heat times you may proceed to the next step.
4)
、
Press
“
SET
VOL+
”
again It will show
“
SET
”
on the LCD panel. Press
“ ”
button to change the
setting temperature. The range of temperature setting is: 15~45
℃。
5)
、
When everything is set correctly, press the
“ ”
to confirm, the system will quit the pre-heating setting
mode.
***Notice***
1
、
All setting of preheating must be in Power OFF mode, just turn on the spa
，
the
LCD will display
“
---
”
2
、
Please note that it shows "on" or "off" on the LCD. "on" means preheating is
turned on mode. when the time of pre-heating is as same as current time, the heater
will start working. "off" means the heater won’t start to work an any time.
3
、
Circulation PUMP and HEATER without working while setting preheating.
6
、
Operation of
preheating
：
When the preheating time is as same as the current time, the LCD screen shows “on” and the tub is also
filled with water. The heater will start to work. The heater, circulation pupm and time counting work atsimultaneity.
The countdown time will be shown on the LCD screen, till the preset time is finished.
During the preheating, The preheating will be turned off automatically once the preset time is finished.
Or Pressing the
“ ”
or
“
ON/OFF
”
key can stop preheating.
***Notice***
i. When setting temperature is lower than or equal with water temperature
，
Even the Preheating is on, but the circulation PUMP and HEATER are not