JNJ SPAS SPA-8098, Руководство по эксплуатации

Страница: 5 / 15

5
1
）
circulation
2
）
Set start of circulation
3
）
Set lasting time for circulation
4
）
Finished
3)
、
Press
“ ”
to set the circulation times; it will show the minimum(5 minutes) on the LCD and this time will
not flash. It will add 5 minutes by pressing
“ ”
each time. It will add 1 hour by pressing
“ ”
each
time
。
The maximum working time is 19hours and 55 minutes. When you have completed this procedure continue
to the next setting.
4)
、
If all settings have been correctly, set Press
“ ”
for confirmation , the system will quit this mode
automatically(press key “ ” to clear settings and exit).
***Notice***
1 All the setting of Circulation-cleaning must be set on Power OFF status
2 Circulation PUMP and OZONE are not working while setting the circulation
cleaning.
5
、
Set preheating (if required)
：
Only one pre-heating setting is allowed each day if required.The LCD can show clearly in the following
figures whether pre-heating settings are set or not
See following Fig.7-8
：