1
Erforderliche Parameter fehlen oder sind falsch.
Original operating instructions
1. Summary of safety notices:
1.1.
The instructions must be read prior to use.
1.2.
The lifting platform may only be operated by duly authorised persons.
1.3.
Make sure that all electrical wiring is undamaged at all times, in order to prevent an electric shock.
1.4.
Make sure that no body parts can become pinched during lifting or lowering of the lifting platform.
1.5.
In the event of any problem, immediately stop work on the lifting platform and contact the
Matthies Workshop Service or your sales partner.
1.6.
The lifting platform must be firmly and stably installed on an even surface.
1.7.
The work area of the lifting platform must be clean and clear.
1.8.
During lifting and lowering of the lifting platform, it must be ensured that the
vehicle is stable and securely fastened. This may take place either with optional wheel support,
an optional assembly stand or via optional lashing. Raise the platform slightly and make sure
that the vehicle stands correctly and safely.
1.9.
When lifting and lowering the lifting platform, the operator must maintain visual contact with
the lifting platform.
1.10. People may not loiter on the lifting platform at any time.
2. Important information for your safety
Prior to commissioning the “JMP Lux 300 EH” lifting platform, please read through this operation
manual carefully and follow the instructions that it contains. If you have any questions, please
contact Matthies Workshop Service.
Caution: voltage. To be installed only by a specialist.
3. Scope of delivery
1x lifting
platform “JMP Lux 300 EH”, preassembled.
4. Technical Data
Minimum height:
19 cm
Maximum height:
115 cm
Maximum Carrying Weight: 300 kg
Dead Weight approx.:
200 kg
Full lift:
30 sec
Full lowering:
30 sec
Voltage supply
230V a.c., 50 Hz
Power consumption:
0.75 KW
Work area:
2000 x 650 mm
