13
14
Fuse & mains plug replacement
(UK & Ireland only)
This appliance is fitted with a BS 1363 13 Amp
plug. If you have to replace the fuse, only use
those that are ASTA or BSI approved to BS
1362 and have a rated current of 13 Amps.
To change the fuse
1.
Use a flat-head screwdriver to prise the
cover off the fuse compartment.
2.
Carefully remove the existing fuse.
3.
Clip the new 13 Amp fuse into place.
4.
Clip the cover back firmly into place.
If the power cord is damaged in any way
please contact JML Customer Services.
This product is unconditionally guaranteed for
one year against all defects of workmanship
and materials. This guarantee does not
Guarantee
affect your statutory rights. If you have any
problems or queries about this product
please contact JML customer services.
Technical Specifications
Cord length
1.9m approx.
Tank size
370ml approx.
Power consumption
2000-2400W
Power supply
220-240V ~ 50/60Hz
Model
ES2416S_02
Technical Information
Disposal and the environment
This product is covered by the waste electrical and electronic equipment
(WEEE) regulations. It should not be discarded with normal household waste,
but taken to your local collection centre for recycling. For further information,
please contact your local authority or approved disposal agency.
Advice For Good Ironing
We recommend using the lowest
temperatures with fabrics that have unusual
finishes (sequins, embroidery, transfers etc.).
If the fabric is mixed (e.g. 40% cotton
60% synthetics), set the thermostat to the
temperature of the fibre requiring the lower
temperature.
If you don’t know the composition of the
fabric, determine the suitable temperature
by testing on a hidden corner of the
garment. Start with a low temperature and
increase it gradually until it reaches the ideal
temperature.
Never iron areas with traces of perspiration
or other marks: the heat of the plate fixes the
stains on the fabric, making them irremovable.
To avoid making silk, woolen or synthetic
garments shiny, iron them inside out.
To avoid making velvet garments shiny, iron
in one direction (following the fibre) and do
not press down on the iron.
The heavier the washing machine is loaded,
the more garments come out creased.
This also happens when the spin drying
revolutions are very high.
Many fabrics are easier to iron if they are not
completely dry.
For example, silk should always be ironed
damp.
Cleaning & Care
General care
Ensure Phoenix Gold
®
FreeFlight is
unplugged and has completely cooled down
before cleaning.
Clean the Ceramic Plate and the body of the
iron using a lightly-damp cloth. Do not use
abrasive scourers or brushes to clean any
part of the iron.
If any man-made fibres fuse to the soleplate, set
the iron on MAX and pass it over a clean piece
of cotton to draw the deposits off the surface.
To clean the exterior, allow the unit to cool
and wipe over with a damp cloth and mild
detergent, then wipe dry.
Содержание Phoenix Gold FreeFlight
Страница 1: ......
