ESPAÑOL
ENGLISH
DEUTSCH
FRANCAISE
PORTUGUESE
POLSKI
РУССКИЙ
ENGLISH
22
its use to inside your business premises only), EvoXpert has been fitted with
a battery similar to those used in mobile telephones (Ion-Lithium / 3.7Vdc-
3050mAh). This provides a limited period of time for copying transponders in
places where the machine cannot be plugged in to a mains electricity supply.
The remaining charge in the battery is always visible on the device via an
LED indicator (which turns red when a recharge is necessary) to inform users
of a low battery charge level.
For recharging the battery, EvoXpert comes with a 220AC / (5V/2.4A) power
adapter. (Power connection jack indicated by the number 1 in the image
below).
When leaving the machine in a fixed location, we recommend also leaving it
plugged in to a mains power supply.
As stated at the beginning of this section, EvoXpert is also capable of
pre-programming vehicle remote controls that must be subsequently
programmed inside the vehicle to become operational.
EvoXpert works with three basic types of blank remote controls:
• KRC100 (TP from JMA (IMMO) and remote control, separate). RKE keys.
• KRC200 (TP (IMMO) and remote control, on the same chip). RKE Keys.
• KRC300 (TP (IMMO) and remote control, on the same chip). SMART Keys.
These can be used for all the models currently available and any others that
may be brought to market in the future.
The method for pre-programming these keys will depend on the type of JMA
remote control being used and the technology installed in the vehicle.
• For the KRC100 remote controls, a special cable is used for connection
to the PS2 port (indicated with the number 2 in the image above). This only
records the part of the remote control from the vehicle.
• For the KRC200 / KRC300 remote controls, the same antenna is used as
the one used for the R/W of the transponders, and the generated RFid field
is used to record both the immobiliser part and the remote control part.
Once pre-programmed, they just need to be registered. This can be done
either via a sequence of actions (On-Board Programming-OBP controls) or via
an OBD-II scanner.
The last feature on the device in terms of functionality is the button on the
rear of the EvoXpert (indicated with the number 4 in the image above), which
does one of two things depending on how long it is pressed:
• 1 short press: Resets any Wi-Fi configuration settings and returns the Wi-
Fi configuration to the default settings (AP Mode).
Resets the EvoXpert.
• 1 long 5-second press (do not release early): Resets the EvoXpert.
Updates are free, with only an Internet connection and prior registration of
the EvoXpert machine required.
2.1 MACHINE ACCESSORIES
When unpacking your EvoXpert, you should find the following items inside
the box:
1. INTRODUCTION AND GENERAL OVERVIEW
1.1 OVERVIEW
To conclude our evolution of the TRS family, we are launching the EvoXpert.
We have developed a more compact and technologically advanced machine
based on the already famous and successful TRS-EVO platform. Besides
cloning transponders, this new machine is also capable of generating remote
controls and programming them via OBD-II using any of the scanners that
can be found in the market.
By applying our philosophy aimed at ensuring total ease-of-use, the EvoXpert
has only 1 ON/OFF button that turns the machine on or off based on how
long it is pressed:
· On: 1 short press.
· Off: 1 long press (4 seconds).
EvoXpert requires an Internet connection because the decryption algorithms
for the various types of technology that exist in the market (Megamos
Crypto/Philips Crypto/Texas Crypto, etc.) run on the calculation servers
installed at JMA.
If you encounter any difficulty using or starting up your device, please
contact the Technical or Customer Services Department of the Altuna JMA
Group.
1.2 TRANSPORT AND PACKAGING
The machine comes secured by a Velcro strip inside a cardboard box with
the following characteristics:
• Width = 147.72 mm
• Length = 176.64 mm
• Height = 78 mm
• Weight = 550 g
When unpacking your machine for the first time, carefully inspect it for any
possible damage that may have occurred in transit.
If you find anything out of the ordinary, do not use the machine and contact
the Technical or Customer Services Department of the Altuna JMA Group.
2. TECHNICAL CHARACTERISTICS
EvoXpert not only offers the same comprehensive range of cloning options
for all the leading transponder manufacturers as the TRS-EVO but also
includes the option to prepare remote controls for opening the vehicle.
All the features of this device are available immediately because its
software has not been fragmented to thus enable additional charges for
certain specific features.
Unlike the TRS-EVO, which could calculate some of the technologies present
in the market (Philips Crypto HT2 / Texas Crypto DST40) with no connection
whatsoever, EvoXpert requires uninterrupted Internet access because users
need to log in to verify the EvoXpert database and to check that access is
available to the calculation servers located at JMA.
EvoXpert has been fitted with all the necessary connectivity features
to make Internet access as easy as possible. This connection can be
established via:
• A wired LAN network (Ethernet port RJ-45, indicated by the number 3 in
the image below).
• A wireless Wi-Fi network.
In order to improve the operational capabilities of the machine (and not limit
1
2
3
4
