ESPAÑOL
ENGLISH
DEUTSCH
FRANCAISE
PORTUGUESE
POLSKI
РУССКИЙ
ENGLISH
27
Press Connect to establish a connection between the device being used as
MMI and the EvoXpert web app.
At this point, you will not have configured any Internet access on your EvoX-
pert so you can accept the message stating that the Wi-Fi network to which
you have connected has no Internet connection.
4.2.2.2) The second stage will require you to use any web browser
available on the access terminal used for connecting to the EVOXPERT Wi-Fi
network and enter the web address that appears on the label found on the
bottom of your EvoXpert (192.168.8.1).
The web page will automatically display your communication configuration
settings menu.
Browse to your Wi-Fi connections (just below the Ethernet connections) and
press SCAN WI-FI to display the next menu.
Here, press RE-SCAN WI-FI and select your router from the list of available
Wi-Fi networks, for which the SSID is the name of the Wi-Fi network (in this
case, dlink-FBA7) and the password is the one used to access the Wi-Fi from
the client router.
After entering the Wi-Fi network settings, after pressing CONNECT and
while waiting for your EvoXpert machine to automatically restart itself, you
can connect the display device (the mobile in this case) to the same Wi-Fi
network because all the devices (EvoXpert and connection device being used
as a display) must be on the same network.
To make this easier (finding the EvoXpert on the network and accessing the
web app included with the device), specific apps have been developed for
(Android/iOS/Windows) that need to be installed and opened.
The following example shows the same steps as explained in Sections
4.2.2.1 and 4.2.2.2 but executed from the app installed in Android.
You can download and install our JMA KEY CLONING PRO app by scanning
the QR Code supplied or by searching in the Google Play Store or the Apple
Store.
As stated in Section 4.2.2.1, you need to select the Wi-Fi network generated
by your EvoXpert machine (called EVOXPERT) on the Android device and then
open the JMA KEY CLONING PRO app.
Press the Scan option and your EvoXpert machine will appear on the list of devices
at the address (192.168.8.1), which is AP Mode by default.
Click connect and the connections page will open by default, where you will need
to select the client Wi-Fi Network so your EvoXpert can gain access to the Internet.
While your EvoXpert machine restarts automatically with the new client
Wi-Fi network settings (wait to re-scan devices connected to the JMA Key
Cloning Pro app until the status LED completes the Green-Red-Green cycle).
Do not forget that the same Wi-Fi network as previously selected on your
EvoXpert machine must also be selected on the Android terminal being used
as a display device because the two devices must be on the same network
to function.
Once the two devices are connected to the same NETWORK, you can now
scan the EvoXpert terminals again with the JMA KEY CLONING PRO app and
connect to your machine.
ANDROID
IOS
