81900518 Rev. A
©2020 JMA Wireless. All rights reserved. This document contains proprietary information. All products, company names, brands, an
d logos are trademarks™ or
registered® trademarks of their respective holders. All specifications are subject to change without notice. Revised: February 13, 2020
+1 315.431.7100 [email protected]
Installation Guide
SV02UTS136-PT
Instructions for Under-the-Seat Antenna
This is the installation guide for the SV02UTS136-PT
Under-the-Seat Antenna.
2
3
Figure 1: SV02UTS136-PT Under-the-Seat Antenna
Description
Qty.
SV02UTS136-PT Under-the-Seat Stadium Antenna
1
Conduit-fitting close-off cap
1
Safety
The antenna and all associated equipment should be installed with all
applicable local and national electrical code guidelines to ensure safe
operation.
Precaution
For best PIM results:
•
Make sure the connectors are clean and free from any metal
flakes/dirt, and tighten the connectors using a torque wrench.
•
Avoid extreme bending to the cable.
•
During installation of the antenna, both cables should not be
crossing one another.
•
Do not remove the dust cap from connectors when not in use.
Necessary tools
Adjustable wrench
2.2-5 calibrated torque wrench
Additional parts not supplied but required for installation
WPS-2MT-14S: JMA Weather Protection System for 2.2-5
1/4”
Superflex connections
WPS-2F: JMA Weather Protection System 2.2-5 female antenna port /
device seal
Suitable hardware required for wall mounting
