Antenna Installation
01
2) Indoor Directional Patch Antenna Installation
System Requirements
- 2.4Ghz Wireless Network (IEEE 802.11b or IEEE 802.11g or IEEE 802.11n)
- One Wireless Device with detachable external Antenna connector
- Connector Type : Reverse SMA Female Jack or Reverse TNC Male
(Optional)
Package Content
- High Gain Wireless Patch Antenna with Cable
and Reverse SMA Connector
1 Set
- Wall Mounting Screw & Wire Organizing Bracket 1 Set
- Quick Installation Guide 1 PCS
- RP-SMA Female to RP-TNC Male Connector Adapter
(Conversion adapter for Wireless Devices with TNC antenna
connectors)
(Optional)
1 PCS
- Rubber Footing 1 Set
Introduction
The high gain indoor wireless patch antenna (hereafter called Indoor Patch
Antenna) is the ideal solution to extend directional coverage and amplify the
signal power of your wireless network. It provides concentrated directional
coverage resulting in a stronger signal but smaller coverage area. The Indoor
Patch Antenna provides the most effective solution in a specified area of
service space and is great for Wireless Access Point and Wireless Network
Adapters and it is simple and easy to setup.
Note: Please take care while adjusting the angle of the
antenna, do not forcefully turn as it will damage the device.
90
o
90
o
Tilt Back
Tilt Front
45
o
225
o
Swivel Left
Swivel Right
