81900518 Rev. A
©2020 JMA Wireless. All rights reserved. This document contains proprietary information. All products, company names, brands, an
d logos are trademarks™ or
registered® trademarks of their respective holders. All specifications are subject to change without notice. Revised: February 13, 2020
+1 315.431.7100 [email protected]
Installation Guide
SV02UTS136-PT
Instructions for Under-the-Seat Antenna
8
9
Connecting external jumpers to pigtails
Pigtail cables are
fitted with
connector caps.
Remove the
connector caps.
Install the WPS-2MT-14S weatherproof boot to external jumper cable
and fit the WPS-2F port seal to the 2.2-5.0 female antenna pigtail
connector. For detailed instructions, see JMA installation instructions,
P/N
Connect male to female connectors and hand-tighten.
Use the flat area on the female 2.2-5.0 pigtail connector
for connector torqueing.
