81900518 Rev. A
©2020 JMA Wireless. All rights reserved. This document contains proprietary information. All products, company names, brands, an
d logos are trademarks™ or
registered® trademarks of their respective holders. All specifications are subject to change without notice. Revised: February 13, 2020
+1 315.431.7100 [email protected]
Installation Guide
SV02UTS136-PT
Instructions for Under-the-Seat Antenna
Antenna SV02UTS136-PT unboxed
4
5
Antenna SV02UTS136-PT comes
with 2 pigtail cables with 2.2-5.0
female connectors.
A conduit-fitting close-off cap is
provided, for use where the
antenna can be configured as
either a left-hand or right-hand
cable-fed product.
The antenna comes configured as a left-hand cabled unit.
Right-hand cable configuration
Though the antenna is shipped with the two pigtail cables on the left-
hand side, these cables can be rerouted to the right-hand side.
Note:
Care needs to be taken not to overbend the pigtail cables.
Starting with the longest pigtail cable, bend the cable back on itself,
such that the maximum bend radius of 0.4” is not exceeded, and feed
the cable back through the antenna to exit the right-hand side.