JLL Ventus Pro Air Power, Инструкция по эксплуатации

Страница: 13 / 22

13
ADJUSTING THE PEDALS
The length of footplate can be adjusted by pulling
the plastic slip forward until it is released from the
pegs. Slide the footplate up or down to the desired
length and line up the holes and push it back into the
pegs.
FOLDING THE MACHINE
To fold the slideway into a verticle position, remove
the large flat knob and pull the spring loaded knob.
Push the slideway up until the you hear a click from
the knob holding it in place. Replace the large flat
knob to the underside of the slideway.
ADJUSTING THE RESISTANCE
Move the handle of the damper on the right hand
side of the machine. The handle slides up and down
opening and closing the vents restricting the air
flow into the machine.
Level 1 is the lowest and level 10 is the highest.
ADJUSTING THE MONITOR
Depending on the user’s height the monitor can be
moved to be read more easily. The monitor stand
can be pushed up and down and the angle of the
monitor itself can be changed.