JLL Ventus Pro Air Power, Инструкция по эксплуатации

Страница: 12 / 22

12
STEP 5
Slide the saddle onto the slideway, the dip in the
saddle will be towards the front stabiliser.
Then, reattach the black stopper.
STEP 6
Secure the slideway to the base using the silver hex
bolt and nuts from before. Also secure using the flat
knob on top.
Make sure the smaller knob located on the side is
removed beforehand and reattached after.
STEP 7
Attach the monitor stand to the base using the two
screws found in the frame.
STEP 8
Next, feed the wires from the monitor through the
ipad stand and connect to the wires from the base.
Secure both the monitor and ipad stand to the
bracket using four screws from the back of the
monitor.