JLG X17JPLUS, Инструкция оператора по безопасности и техническому обслуживанию

Страница: 57 / 200

INSTRUMENTS AND CONTROLS
55
MUX17JP021602
Boom Lift Models X17JPLUS
When the load sensor measures a load exceeding the allowed work load the main
screen disappears for three seconds, replaced by the overload error display, the
audible warning is activated, then the overload icon appears in position 5 in place
of the icon enabling the overhead movements.
POSITION 6:
Position 6 displays the icon confirming that track movements (stabilisers, tracks,
track extension) are enabled.
This icon means that all conditions for operating the track movements have been
checked. No icon on means the stabilisers cannot be used and the track cannot be
extended. The machine, however, can travel even when the icon is off, as long as
all 4 stabilisers are lifted from the ground.
POSITION 7:
Position 7 is used for functional signals:
Fig. 37 Overload
Fig. 38 Overload error
Fig. 39 Aerial part closed and aligned