SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-6
31215090
DO NOT OPERATE MACHINE FROM THE GROUND CONTROL CONSOLE WITH PERSON-
NEL IN THE PLATFORM EXCEPT IN AN EMERGENCY.
Ground/Platform/OFF Key Selector Switch
The key selector switch on the
Ground Control Station directs elec-
trical power to the desired control
station. When the switch is turned
to the ground position (
1
), power is
supplied to the controls at the
ground control console. When the
switch is turned to the platform
position (
2
), power is supplied to
the controls at the platform control
console. The switch should be set to
the OFF position (
3
) when not using
machine or parking the machine
overnight.
Platform Lift/Lower Switch
A three-position momentary contact switch
controls raising and lowering of the platform
from the ground control console.
NOTE:
There will be a brief delay between switch
activation and movement of the plat-
form.
When operating platform from the ground
controls -
Toggle the lift/lower switch to up position and hold to raise platform,
or down position and hold to lower an elevated platform. Release to
center position to stop all movement.
Inverter ON/OFF Switch (If Equipped)
When switched on, the inverter converts DC voltage stored in the on-
board batteries to AC voltage for use at the AC receptacle outlet
mounted in the platform.
1
2
3
To
order
go
to
Discount-Equipment.com
