MACHINE CONTROLS
Section 1
Page 1-9
1001206597
METRO-LED
LIGHTING TOWER CONTROL
OPTIONAL METRO-LED MODULE
Control Panel Push Buttons
Stop/Reset
Stop lighting tower operation
Reset alarm when failure occurs
Lamp test in stop mode
(press for at least three seconds)
Manual Start Mode
Press this key to enter Manual Mode
Auto Mode
Press this key to enter auto start mode
select interface; use up/down arrow keys
to select mode and press “AUTO” to
confirm selection.
Mute
If an alarm occurs, pressing the button can
remove alarm siren, and the indicator will
light up; press the button again to reset the
alarm and the indicator will turn off. If
alarm retriggers in mute status, the
controller will remove the mute status.
Strobe Light / Beacon
Switches the beacon light on or off.
(only when the engine is running)
Start
Start lighting tower set in Manual Mode.
Light Off
During running in manual mode, turn off
one light for each press of the button.
Light On
During running in normal manual mode,
turn on one light for each press of the
button.
Menu / Confirm
Press this key to enter menu interface. In
parameter setting interface press this key
to right shift cursor and confirm the setting.
Down/Config
1) Screen Scroll
2)
Down cursor and decrease value of
menu setting
Up/Config
1) Screen Scroll
2)
Up cursor and increase value of
menu setting.