SECTION 2 - PREPARATION AND INSPECTION
1-877-254-3876
LIFTPOD by JLG
1001070451
1-877-2-LIFTPOD
www.liftpod.com
2-5
Walk-Around Inspection Components
NOTE:
On all components, make sure there are no loose or miss-
ing parts, everything is securely fastened, no visible dam-
age, or excessive wear exists in addition to any other
criteria mentioned.
1. Rear Wheels
- Check for any debris stuck to or around
wheels. Make sure bolts are fastened.
2. Base Frame
- Check for cracks or corrosion, especially
around the mast-stump base (see Figure 2-2.). Check
level bubble is clean and secure.
3. Mast Assembly
- No cracks or corrosion, especially
around base and flange; no excess wear, kinks, nicks or
damage; carriage running surfaces smooth and unob-
structed; free of dust, oil & grease.
4. Carriage Frame
- check for visible cracks; check rollers
for visible wear; check carriage frame welds for visible
cracks (see Figure 2-2.).
Figure 2-1. Daily Walk-Around Inspection
(Sheet 1 of 2)
1
2
3
4
REAR
FRONT
Figure 2-2. Examples of cracks
Parent Metal Crack
Weld Crack
FS.book Page 5 Wednesday, February 11, 2009 11:54 AM
