SECTION 3 - MACHINE OPERATION
1001070451
LIFTPOD by JLG
1-877-254-3876
3-16
www.liftpod.com
1-877-2-LIFTPOD
Descending
CRUSHING HAZARD - BE AWARE OF DESCENDING PLATFORM WHEN
LOWERING THE PLATFORM. KEEP HANDS OR FEET OFF THE MAST
ASSEMBLY AND FROM BENEATH PLATFORM.
On the cordless drill, move the direction selector to the "unscrew"
(anti-clockwise) direction. Push the cordless drill down to disen-
gage the driveshaft interlock and squeeze the trigger to descend.
If using the optional powerpack, move the direction selector to the
DOWN
position. Hold the handle so the enable trigger is pressed
and squeeze the speed trigger.
To stop at anytime, simply release the speed trigger.
To exit the platform, ensure the platform is all the way down until it
touches-down on the base. This will engage the drive mecha-
nism’s overdrive ratchet, making a ratcheting sound. This means
the platform has reached its lowest position and the trigger should
be released.
NOTE:
Before transporting, maneuvering or disassembling
machine, ensure the platform is all the way down. The
carriage lock is engaged automatically when the platform
is fully lowered and all load is removed.
Powerpack Emergency Stop/Shutdown Button
If the platform stops responding to operator input at any time while
the platform is moving, use the emergency stop button to cut the
power to the motor.
Figure 3-21. Emergency stop button operation
Press down to activate
Rotate clockwise
Emergency Stop
to release/reset
Emergency Stop
FS.book Page 16 Wednesday, February 11, 2009 11:54 AM
