Pinout
SloMo Mini to Video Device
The table below details the pinout of the cable included with the SloMo
Mini.
SloMo
Mini
Function
Machine
1
Machine
2
Machine
3
Machine
4
Ports
1,2,3,4
Ground
21
11
16
6
1
Receive A
22
25
17
20
2
Transmit B
10
12
5
7
3
Receive B
9
13
4
8
7
Transmit A
23
24
18
19
8
Note: Some video devices do not use pin 1 for ground so you may have to connect pin 1
at each end of the SloMo Mini cable to pins 4 and 6 on your video device.
The data transmission from the SloMo Mini follows the standard P2
specification. EIA RS-422A at 38400 bits/sec, 8 data bits, 1 stop bit and
odd parity.
SloMo Mini to SloMo Mini / SloMo Mini to Computer
To connect two SloMo Mini controllers together, an RS-422A crossover
adapter or cable will be needed. An adapter is available from JLCooper
Electronics by ordering p/n 620026. An RS-422A crossover cable can be
made by using the following pinout:
These
are
tied
together
1
4
6
9
1
4
6
9
These
are
tied
together
2
8
3
7
7
3
8
2
Note: pins 1, 4, 6 and 9 are grounds
and are connected together at each
end.
Note: pins 1, 4, 6 and 9 are grounds
and are connected together at each
end.
Note: pins 1, 4, 6 and 9 are grounds
and are connected together at each
end.
Note: pins 1, 4, 6 and 9 are grounds
and are connected together at each
end.
SloMo Mini User Manual
45
