•
STOP Command
A Stop command is sent.
•
STILL Command
A Shuttle=0 (Still) command is sent.
•
STILL, STOP
The first push will cause a Still command to be sent. The second push will
cause a Stop to be sent.
13.
FFwd and Rew
Sets Fast Forward and Rewind behavior.
•
Latched
After release of the key, the controlled SloMo Mini will remain in selected
operation until some other button is pressed.
•
Momentary
Upon release, either a Stop or Still will be sent, depending on the Stop
Method selected above.
14.
Trk Data Tally
Allows disabling of this tally, which, under unusual circumstances, might disrupt
normal track select operations. If this is disabled, the SloMo Mini will not "know"
of any track operation done on the controlled SloMo Mini itself.
•
Disabled
•
Enabled
15.
W1 Button Send
W2 Button Send
Sets the command sent when the W1 and W2 buttons are pressed.
•
Off
(no command sent)
•
Preroll Cmd
•
Full EE On
•
Preview Cmd
•
Full EE Off
•
Review Cmd
•
Select EE On
•
Autoedit Cmd
•
½
x Play
•
Sync Play Cmd
•
½
x Rev Play
•
Clip Minus
•
Clip Plus
•
Loop Mode
•
Toggle Clip Enable (see "Editing the Cue List" below)
•
Change SloMo (see "Editing the Cue List" below)
16.
Log Operation
Enables or disables Log Operation. (See Log Operation in appendix)
•
Disabled
•
Enabled
17.
Cue Operation
This determines how cues are stored and played back and the definition of a cue.
SloMo Mini User Manual
21
