JLC SloMo Mini, Руководство пользователя

Страница: 44 / 48

Where:
Cue# is a three digit ASCII value (000 to 999 or 000 to 399) that
specifies the cue location.
Time, StartTime and EndTime are 11 digit ASCII values that specifies
timecode values in the following format:
hh:mm:ss:ff
n1
and
n0
define play speed for the clip in CuePlyStop Slo mode.
The actual play speed is can be determined by the following
equation.
These are the same values sent from the SloMo Mini to a machine
and are defined on page 17 of the Sony document
Protocol of
Remote (9-pin) Connector 2nd Edition.
The ‘
@
’ character terminates the sending of cue data.
When sending data from a computer, a 30 mS delay must be inserted
between each cue to allow the SloMo Mini to write to nonvolatile memory.
The SloMo Mini performs this when it sends data.
For details on how to connect two SloMo Mini controllers together or to
connect your SloMo Mini to a computer, refer to the pinout section.
⎟
⎟
⎠
⎞
⎜
⎜
⎝
⎛
− × + =
⎟
⎠
⎞
⎜
⎝
⎛
−
⎟
⎠
⎞
⎜
⎝
⎛
−
+
⎟
⎠
⎞
⎜
⎝
⎛
−
2
32
2
32
1
0
2
32
1 1 1
10 10
256
10
n n n
n
TapeSpeed
SloMo Mini User Manual
44