When commands are reached at the end of the parameters, the arrow
symbol no longer appears. The second line will now be an instruction,
such as the following:
In some cases, additional instructions may appear after the pressing of
ENTER. Pressing the CLR/ESC key will exit out of the menu operation.
On the following pages are the list of parameters and commands along with
all the possible options. The defaults after initialization are shown in
boldface
.
Parameters
1.
Time Code Type
This is only used by the Step Frame (Frame+1 and Frame-1) functions. This
determines how the SloMo Mini behaves at whole second boundaries.
ENTER = Erase
•
24
•
29.97 drop
•
25
•
30 drop
•
29.97
•
60
•
30
2.
Record Enable
Allows record and edit functions to be enabled or disabled.
•
Enabled
•
Disabled
3.
T-Bar Range
This sets the speed range of the T-Bar from bottom to top.
Note: Due to limitations of the P2 protocol, these speeds may not be exact.
•
Normal
!
Scaling Disabled: Still to 10x
!
Scaling Enabled: T-Bar Speed Min and Max.
•
± 5%
!
95% to 105% of play speed
•
± 10%
!
90% to 110% of play speed
•
Bidirectional
!
-1x to +1x play speed
4.
T-Bar Mode
Defines how the T-Bar operates.
•
Passive
Movement of an Enabled T-Bar sets the speed, which will be sent upon
either pressing the Play button or calling up a Clip or Cue. Actual
SloMo Mini User Manual
18
