JLA D30 Phase 7 Non-Coin Скачать руководство пользователя

Страница: 8 / 60

B. SAFETY PRECAUTIONS

WARNING:

For your safety, the information in this manual

must be

followed to minimize the risk of

fire or explosion or to prevent property damage, personal injury, or loss of life.

WARNING: The dryer

must never be

operated with any of the back guards, outer tops, or

service panels removed

PERSONAL INJURY OR FIRE COULD RESULT

DO NOT

store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other

appliance.

2. Purchaser/user should consult the local gas supplier for proper instructions to be followed in the event the

user smells gas. The instructions

should be

posted in a prominent location.

3. WHAT TO DO IF YOU SMELL GAS...

DO NOT

try to light any appliance.

DO NOT

touch any electrical switch.

DO NOT

use any phone in your building.

d. Clear the room, building, or area of

ALL

occupants.

e. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

f. If you

cannot

reach your gas supplier, call the fire department.

4. Installation and service

must be

performed by a qualified installer, service agency, or gas supplier.

5. Dryer(s)

must be

exhausted to the outdoors.

6. Although the manufacturer produces a very versatile dryer, there are some articles that, due to fabric

composition or cleaning method,

should not

dried in it.

WARNING:

Dry only water washed fabrics.

DO NOT

dry articles spotted or washed in dry

cleaning solvents, a combustible detergent, or “all purpose” cleaner.

EXPLOSION COULD RESULT

WARNING:

DO NOT

dry rags or articles coated or contaminated with gasoline, kerosene, oil, paint,

or wax.

EXPLOSION COULD RESULT

WARNING:

DO NOT

dry mop heads. Contamination by wax or flammable solvents will create a

fire hazard.

WARNING:

DO NOT

use heat for drying articles that contain plastic, foam, sponge rubber, or

similarly textured rubber materials. Drying in a heated basket (tumbler) may damage
plastics or rubber and may be a fire hazard.

Содержание D30 Phase 7 Non-Coin





























































Результаты поиска

Содержание D30 Phase 7 Non-Coin

Отзывы:

Похожие инструкции для D30 Phase 7 Non-Coin

Бренды по названию

Популярные бренды

JLA D30 Phase 7 Non-Coin, Руководство по установке

Результаты поиска

Содержание D30 Phase 7 Non-Coin

Отзывы:

Похожие инструкции для D30 Phase 7 Non-Coin

Бренды по названию

Популярные бренды