background image

Page 37

 | 

Fathom SA

-600W

LIMITED WARRANTY / SERVICE INFORMATION

JL AUDIO warrants this product to be free of defects in materials and 

workmanship for a period of three (3) years from the original date of purchase. 

Damage caused by the following is not covered under warranty: accident, 

misuse, abuse, product modification or neglect, failure to follow installation 

instructions, unauthorized repair attempts, misrepresentations by the seller. This 

warranty does not cover incidental or consequential damages and does not cover 

the cost of removing or reinstalling the unit(s) or shipping the unit(s) to JL Audio 

for service. Cosmetic damage due to accident or normal wear and tear is not 

covered under warranty.

This warranty is not transferable and applies only to the original purchaser 

of the product from an authorized JL AUDIO dealer. Warranty is voided if the 

factory-applied product serial number is removed or defaced.

Should service be necessary under this warranty for any reason due to 

manufacturing defect or malfunction, JL AUDIO will, at its discretion, repair or 

replace the defective product with new or remanufactured product at no charge.

Any applicable implied warranties are limited in duration to the period of 

the express warranty as provided herein beginning with the date of the original 

purchase at retail, and no warranties, whether express or implied, shall apply 

to this product thereafter. Some states do not allow limitations on implied 

warranties, therefore these exclusions may not apply to you. This warranty gives 

you specific legal rights, and you may also have other rights which vary from 

state to state.

If you need service on your JL AUDIO product:

All warranty returns should be sent to JL AUDIO freight prepaid through 

an authorized JL AUDIO dealer and must be accompanied by proof of purchase 

(a copy of the original sales receipt). Direct returns from consumers or non-

authorized dealers will be refused unless specifically authorized by JL AUDIO 

with a valid return authorization number. Warranty expiration on products 

returned without proof of purchase will be determined from the manufacturing 

date code. Coverage may be invalidated as this date is previous to purchase date. 

Return only defective components. Non-defective items received will be returned 

freight-collect. Customer is responsible for shipping charges and insurance in 

sending the product to JL AUDIO. Freight damage on returns is not covered 

under warranty. Always include proof of purchase (sales receipt).

For Service Information in the U.S.A. please call:

JL Audio customer service:  

(954) 443-1100 during normal business hours (Eastern Time)

JL Audio, Inc • 10369 North Commerce Parkway, Miramar,  FL 33025

International Warranties:  

Products purchased outside the United States of America are covered only by that 

country’s distributor and not by JL Audio, Inc.

WARNING

WARNING: THIS PRODUCT CONTAINS NO USER-SERVICEABLE PARTS.

PRODUCT IN WHICH DISASSEMBLY, REPAIR AND/OR MODIFICATION HAS 

BEEN ATTEMPTED BY UNAUTHORIZED PARTIES WILL NOT BE COVERED 

UNDER WARRANTY.

Содержание Fathom SA-600W









































Отзывы: