JL Audio Fathom SA-600W, Руководство пользователя

Страница: 28 / 40

| Fathom SA -600W Page 28
RECOMMENDED STEREO SYSTEM SETUP PROCEDURES
1) Preparation for Setup Process: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2) Apply A.R.O: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
3) Level Setting: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4) Polarity/Delay Adjustment: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
5) Adjust E.L.F. Trim: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
PREPARATION FOR STEREO SYSTEM SETUP:
Please confirm the following system settings before beginning the setup
process. This will ensure a neutral starting point and an effective setup of your
subwoofer system. NOTE: In this Stereo System setup process, we assume that
the SA-600W is handling bass management tasks.
On your Stereo Preamp:
Before beginning setup of your SA-600W we recommend that you set your
receiver or preamp/processor as follows:
1. Set Balance controls to Center.
2. Set all Tone controls to “0” and defeat all Equalizer features.
3. Defeat any secondary processing (DSP “enhancement” or room processing)
On the SA-600W:
Before beginning the stereo system setup procedure, ensure your SA-600W’s
controls are set to a neutral starting position.
1. Set GAIN to REF
2. Set POLAR to 0 deg
3. Set DELAY to OFF
4. Set ELF to OFF
5. Set XO to ON at 24dB, with a frequency of 80 Hz (79.9 Hz)
6. Set EQ to OFF